Xproto-L in stock
Warning: The PCIe riser cable is Gen3 (PCIe 3.0). If you are using a Navi or Ampere GPU along with a B550/X570/Z490/Z590 motherboard, please set your PCIe slot setting from Gen4 (PCIe 4.0) to Gen3 in the BIOS. If you do not change the setting, there is a high risk that you will have video output issues. There’s no need to be concerned about being limited to Gen3, as testing has shown that even with an RTX 3080, there is less than a 5% performance loss downgrading from a Gen4 to Gen3 connection.
You can ignore the above information if you choose PCIE 4.0 riser cable
Please read ALL the information below before you buy!
AIO mounting: You can add an AIO module (or two) and a custom set of cables (for both versions of the Xproto; you can order a set for your power supply on this website) to cart and checkout the items together. One case can be attached with up to two AIO brackets without paying any extra postage for the brackets. If there are more than 2 AIO brackets in your order, please note that you will have to pay extra shipping costs (~$5USD for each additional AIO bracket).The AIO bracket is compatible with both the Xproto and Xproto-L.
GPU compatibility: There are 3 PCI slots for GPU mounting, ensuring you can use giant graphics cards such as the 3090 FE. There is 345mm of GPU length clearance, plenty enough for even the largest graphics cards available.
Warning: Some purchasers have reported that customs duties were charged. You may have to pay customs duties or a similar import tax depending on your country’s import regulations. If you have special requirements to declare, please let us know in your order.
Note: If you wish to add more products to your order (such as an AIO mount plate), please place a new order and choose the “free shipping” option.
Shipping time: Once the order is confirmed and ready to ship, XTIA will send you a confirmation email. The order will be sent out and we will send you the tracking number through another email within a few days. The whole process normally takes around 3-5 business days.
Shipping region costs: To request a quote of postal costs for countries and regions not listed, please contact us via email at welch52553[at]gmail.com.
Cancelling an order: Please send an email to welch52553[at]gmail.com and provide your order number to request a cancellation. Your order can only be cancelled before it is shipped, and we cannot guarantee we can cancel your order successfully. There may be a cancellation fee if your order is unusual or custom.
What are the differences between the Xproto and Xproto-L? Why would I get an Xproto-L as opposed to the original?
3-slot GPUs (like the 3090 FE) are supported.
ATX power supplies are supported, thanks to 30mm more PSU length clearance. We recommend an ATX PSU less than 150mm long so there is sufficient space for cable management; if your PSU is longer than 150mm you will likely have to use it in the sideways-oriented position.
Unique vented spine designed for flow-through coolers, like the RTX 30XX FE series.
GPU length clearance increased to 345mm, ensuring no graphics cards are incompatible.
Xproto-L size : 375*190*168mm
Review by Optimum Tech
XTIA “Butterfly” Structure
The specially designed intermediate mezzanine (Zone C) can be used as a cable management area and also contains a hard drive mount point.
The Butterfly design provides high structural integrity and an aesthetically pleasing modular design.
Three Segment Case Assembly
Zone A: PSU & motherboard
Zone B: GPU & power switch
Zone C: cable caddy, hard drives
Modified Open “Sandwich” Case Layout
The open chassis has much better heat dissipation, leading to improved gaming performance. Because of better thermals for your components, you can dial down your fan curves to keep noise at a minimum. It also negates any noise-creating turbulence caused by side panels.
The open-air layout has no dead corners for dust to accumulate, and any dust can be easily cleaned off.
Display your beautiful hardware, viewable at a glance.
Fully CNC Machined
The case is CNC machined from thick, sturdy 4mm aluminum panels, allowing the case to be both lightweight and steady.
The case is a nearly unibody design, allowing for easy assembly as well as elegant rounded corners.